Oil transfer pump extractor excellent power-driven design makes it quite labor-saving and convenient than manual ones.
No more jacking of vehicles or removing drain plugs. Great value for a simple, low-cost oil change pump.

Material: Plastic & Aluminium
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Diesel Flow Rate: approx. 250L / Hour
Line Length: approx. 71cm/28''

Diesel Flow Rate: approx. 250L / Hour
Inlet Hose Length: 155cm/61''
Inlet Hose Outer Diameter: 6mm/0.236''
Inlet Hose Inner Diameter: 4mm/0.157''
Outlet Hose Length: 124.5cm/49''
Outlet Hose Outer diameter: 12mm/0.472''
Outlet Hose Inner Diameter: 10mm/0.39''

Package:
1 x Oil change pump extractor
1 x Outlet hose
1 x Inlet hose
2 x Hose hoops
2 x Battery clamps
1 x User manual

Note:
1. NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.)
2. The working-period for this oil-extractor should not exceed 30 minutes. we recommend a short break after 10-20 minutes continuous usage to allow the unit to cool.
3. Do not pump fuel, petrol, paraffin or other easily en-flammable liquids-Danger! Do not pump water(no lubrication of the pump). Only pump warm motor-oil(40-60degrees) do not pump off motor-oil.
4. If you want to connect this pump to AC power, you will need a power converter.
5. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.